|
OEM
HONDA PARTS FOR GX120/160/200'S
All parts are
genuine Honda unless otherwise specified
In some cases, New "Take Off" Parts
are shipped, chick here for more information
Most parts except rod, Piston/Rings, Crankshaft, or Cams will fit
Predators |
|
AIR CLEANERS
BEARINGS
BLOCKS
BOLTS
CAMSHAFTS
CARBURETORS
CRANKSHAFTS
ELECTRIC START
KITS EMULSION TUBES
FLYWHEELS &
FANS
GASKETS
GAS CAPS
GAS TANKS
GEAR BOXES
FUEL LINE
HEADS,
CYLINDER
IGNITION JETS
LIFTERS
MUFFLERS
PISTONS
PUSHRODS REBUILD KITS
RECOILS
RINGS ROCKER ARMS RODS,
CONNECTING
SEALS & PLUGS
SHORT-BLOCKS
SHROUDS
SPRINGS
SUNGEARS (HX2)
TIMING
KEYS
VALVES VALVE COVERS
VALVE GUIDES
VALVE TRAIN
COMPONENTS
WRISTPINS & CLIPS |
|
PARTS DIAGRAMS
CLICK HERE
GX200 |
|
NR Keychain Flashlight |
 |
FLASHLIGHT |
$5.00 |
|
|
NR Racing Stickers, Vinyl |
 |
STICKER |
$0.75 |
|
|
AIR FILTER ASSEMBLIES |
|
Air Filter Assembly, GX120
|
Linkage plate may not be included |
TOAF120L |
$12.99 |
|
|
Air Filter Assembly, GX160/200
|
TOAF160L |
$12.99 |
|
|
BEARINGS |
|
Bearing, Case, GX120, NTN or Equivalent, Japan |
 |
120BEARING |
$23.00 |
|
|
Bearing, Case, GX160/200, NTN or Equivalent, Japan |
NEW IN PACKAGE |
$23.00 |
|
|
OEM Honda, New Take Offs |
$5.00 |
|
|
Clone, New Take Offs |
$1.00 |
|
|
Bearing, Case, GX120, Special Race - loose Free Spinning, These are OEM
bearings that have had the Balls and race ground for an extra .001" to .002"
clearance. This helps to free up the crank, eliminate any bind, and spin
free. |
120FREEBEARING |
$40.00 |
|
|
Bearing, Case, GX160/200, Special Race - loose, Same as above, except for
GX160/200s. Note: Use only in stock type motors. Do not use in high HP
outlaw and modified motors. |
160FREEBEARING |
$40.00 |
|
|
BLOCKS
(includes side cover, bolts (except 120) and gov
assembly. Bearings
and seals not included. |
|
Block, GX120, New take off |
 |
120 QX2 Block |
$149.00 |
|
|
120 HX2 Block |
$199.00 |
|
|
Block, GX160, New take off
|
160 HX2 Block |
$199.00 |
|
|
160 QX2 Block |
$149.00 |
|
|
Block, GX200, New take off |
200 QX2/QXE2 Block |
$169.00 |
|
|
Block, 6.5 Aftermarket (includes
Side cover, bearings, and seals) |
|
Replacement Block for Yellow Clone |
$50.00 |
|
|
Replacement Block for Blue Clone |
$50.00 |
|
|
We also have new Honda blocks available, please e-mail for information |
|
BOLTS & NUTS |
|
Bolt Kit, OEM, GX120 - Stock OEM Honda bolts. Includes Head,
Side Cover, Shroud, & valve Cover Bolts. New takes off bolts |
 |
120BOLTKIT |
$12.00 |
|
|
Bolt Kit, OEM, GX120 - Stock OEM Honda bolts. Includes Head,
Side Cover, Shroud, & valve Cover Bolts. New in
package head & side cover bolts and take off shroud and valve cover
bolts |
120BOLTKITNEW |
$22.00 |
|
|
Bolt Kit, OEM, GX160/200 - Stock OEM Honda bolts. Includes Head,
Side Cover, Shroud, & valve Cover Bolts. New take off bolts |
160BOLTKIT |
$12.00 |
|
|
Bolt Kit, OEM, GX160/200 - Stock OEM Honda Head and Side
Cover bolts (shroud and valve cover bolts not included). All
bolts are new in package genuine Honda. |
160BOLTKITNEW |
$15.00 |
|
|
Bolt, Head, GX120, OEM Honda, each |
 |
1436609 |
$1.40 |
|
|
Bolt, Side Cover, GX120, OEM Honda, each |
 |
0636852 |
$2.20 |
|
|
Bolt, Head, GX160/200, OEM Honda, each |
|
1436591 |
$1.40 |
|
|
Bolt, Side Cover, GX160/200, OEM Honda, each |
 |
2751725 |
$1.10 |
|
|
Bolt, Coil, GX120/160/200 OEM Honda, each |
|
90015-883-000 |
$2.40 |
|
|
Bolt, Valve and Side Cover, GX120/160/200 OEM Honda, each |
 |
0636845 |
$1.30 |
|
|
Dowel, Head, OEM, 10 x 16, pair |
|
94301-10160 |
$4.00 |
|
|
Dowels, Head shortened, 10 x 12, pair
Use with milled heads |
NRDOWLSH |
$10.00 |
|
|
Dowels, Side Cover, OEM, 10 x 16, pai |
94050-06000 |
$4.00 |
|
|
Stud, Carb GX120/160/200 OEM Honda, each |
 |
4588323 |
$4.00 |
|
|
Nut, Exhaust, M8 (12mm Head) |
 |
94001-08000-0S EACH |
$1.00 |
|
|
Bag of 25 |
$12.00 |
|
|
Stud, Exhaust GX120/160/200 OEM Honda, each |
 |
1431097 |
$2.90 |
|
|
CAMSHAFTS & LIFTERS |
|
Camshaft, GX120 |
 |
1929595 |
$83.00 |
|
|
Camshaft, GX160 |
1929611 |
$97.00 |
|
|
Camshaft, GX200 |
4742920 |
$97.00 |
|
|
NEW TAKE OFF |
$40.00 |
|
|
Lifter, GX120 & GX160 |
 |
5181383 |
$9.50 |
|
|
Lifter GX200 |
4742946 |
$11.50 |
|
|
Spring, Compression Release, Use
to replace spring on Honda Cams |
|
14568-ZE1-000 |
$3.00 |
|
|
CARBURETORS & PARTS
(Note: Jets are in separate section) |
|
Carburetor, GX 120 (Japan ZH7)
Note: On QMA motors, the Jap carburetors will make significant more power
than the Thai carbs. |
 |
16100-ZH7-W51 |
$70.00 |
|
|
Carburetor, GX 120 (Thai Z0S)
Equipment applications only, not for racing |
7346661 |
$29.00 |
|
|
Carburetor, GX 160 (Japan ZH8)
Note: On QMA & ASN motors, the Jap carburetors will make significant more
power than the Thai carbs. |
5152491 |
$70.00 |
|
|
Carburetor, GX 160 (Thai Z0T)
Equipment applications only, not for racing |
16100-Z0T-911 |
$29.00 |
|
|
Carburetor, GX 200 (Thai Z0V BE64A) |
16100-Z0V-921 |
$30.00 |
|
|
Carburetor, GX 200 (Japan ZL0 BE64B) |
5148101 |
$65.00 |
|
|
Carburetor, GX 200 Aftermarket
(Not OEM Honda) |
Huayi Carb |
$20.00 |
|
|
Rui*ing Carb |
$28.00 |
|
|
Air Bleed Screw Carb (Idle Mixture screw) |
 |
4219879 |
$13.00 |
|
|
Bowl Set, Carburetor |
 |
2464287 |
$19.00 |
|
|
Float Assembly, Carb |
 |
7346596 |
$19.70 |
|
|
Needle Assy (Float Valve) |
 |
1441476 |
$19.00 |
|
|
Hose, Fuel, Roll,
Black OEM Honda |
|
See Gas Tanks |
|
Insulator GX120 |
 |
1427129 |
$13.00 |
|
|
Insulator GX160 |
 |
1427137 |
$13.00 |
|
|
Insulator GX200 |
OEM HONDA |
$13.00 |
|
|
CLONE |
$2.50 |
|
|
Choke Lever |
 |
|
$6.00 |
|
|
Governor Rod |
 |
|
$3.00 |
|
|
Rebuild Kit, Carb rebuild (includes o rings and seals),
GX120, 160, &
GX200 Carbs |
 |
3477171 |
$13.00 |
|
|
CRANKSHAFTS |
|
Crankshaft GX 120 QX2 |
 |
13310-Z0S-800 |
$59.00 |
|
|
Blueprinted and Clearanced
(.003-.004") |
$89.00 |
|
|
Crankshaft GX 120 HX2 (for 6 to 1 gear box) |
|
13310-Z4H-620 |
$70.00 |
|
|
Blueprinted and Clearanced (.003-.004") |
$100.00 |
|
|
Crankshaft GX 160 QX2 (3/4" Shaft) |
|
13310-Z0T-800 |
$69.00 |
|
|
Blueprinted and Clearanced (.003-.004"),
ASN |
$99.00 |
|
|
Crankshaft GX 160 HX2 (for 6 to 1 gear box) |
|
13310-Z4X-620 |
$70.00 |
|
|
Blueprinted and Clearanced (.003-.004")
1/4 Midget |
$100.00 |
|
|
Crankshaft GX 200 HX2 (for 6 to 1 gear box) |
|
7492770 |
$149.00 |
|
|
Blueprinted and Clearanced (.003-.004") |
$189.00 |
|
|
Crankshaft GX 200 RH2 (for 6 to 1 gear box) |
|
13310-ZL0-020 |
$135.00 |
|
|
Blueprinted and Clearanced (.003-.004") |
$175.00 |
|
|
Crankshaft GX 200 QX2 (3/4" Shaft) |
|
7351638 |
$99.00 |
|
|
Blueprinted and Clearanced (.003-.004") |
$129.00 |
|
|
Crankshaft GX 200QX2 Type (3/4" Shaft) -
Aftermarket |
 |
Crank, Stock Specs |
$45.00 |
|
|
Blueprinted and Clearanced (.003-.004") |
$85.00 |
|
|
ELECTRIC START KITS FOR GX200s (&160s) -
Limited Availability on these Kits |
|
Genuine Honda Electric Start Kit for GX160s and 200s
(Fan cover requires minor trimming on 200). Includes all parts needed
including charging coil. All parts are Genuine Honda. No Instructions |
 |
ELECSTRKIT |
$299.00 |
|
|
Aftermarket Electric Start Kit for GX160s and 200s (Fits
Chinese 6.5 OHV and Hondas). No hardware or instructions |
 |
CLELECSTRKIT |
$149.00 |
|
|
Starter Motor for GX200 and
Clones, Aftermarket (not OEM Honda) |
 |
|
$60.00 |
|
|
Control Box for GX200 and Clones,
Aftermarket (not OEM Honda) |
 |
|
$20.00 |
|
|
EMULSION TUBES |
|
Emulsion Tube GX120 |
 |
16166-ZH7-W50 |
$15.00 |
|
|
Emulsion Tube GX160 |
|
$16.00 |
|
|
Emulsion Tube GX140 |
OEM HONDA |
$15.00 |
|
|
AFTERMARKET |
$7.00 |
|
|
Emulsion Tube GX200 |
|
$16.00 |
|
|
FLYWHEELS & FANS |
|
Flywheel, GX120 Tier 3 (QMA 2008 Rules) |
 |
31100-ZE0-020 |
$90.00 |
|
|
Flywheel GX200, OEM Honda, New Take Off |
31100-ZE7-010 |
$50.00 |
|
|
Flywheel GX160, OEM Honda, New
or New take off |
31100-ZE1-010 |
$83.00 |
|
|
Flywheel, GX160/GX200 with Magnets for 12
to 50 watt Charging Coils, 2 magnet, Available with
or without ring gear for
electric start. Requires appropriate coil for charging system |
 |
Without ring gear
31100-ZE1-811 |
$119.00 |
|
|
With ring gear for starter
31100-ZE1-821 (36 watt max) |
$129.00 |
|
|
CLONE FLYWHEELS, Not for Racing,
do not exceed 3600 rpm. OEM Take Offs |
|
Without ring gear |
$10.00 |
|
|
With Ring Gear for Starter |
$40.00 |
|
|
Coil, Charging, Use with 12 to 50
watt flywheels Note: these are designed to
charge batteries, not to run lights. If you want to run lights with these,
you will also need a battery. |
 |
12V, 25 Watt(Single Coil) |
$50.00 |
|
|
 |
12 V, 50 Watt
31510-ZE1-711 |
$109.00 |
|
|
CHARGING/LIGHTING SYSTEM, 88 Watt, 12 Volt, Coil and flywheel (4
magnet) sold
separately.
Note: A regulator is required for this to function properly. |
 |
COIL, 12V, 88W,
4480786 |
$190.00 |
|
|
 |
FLYWHEEL FOR 84W COIL
w/o electric start |
$109.00 |
|
|
FLYWHEEL FOR 84W COIL
with electric start |
$149.00 |
|
|
Nut, Fly Wheel
(For Starter nuts, see Engine Acc) |
 |
442038 |
$5.00 |
|
|
Fan, 160/200 |
 |
1428051 |
$10.00 |
|
|
Fan, GX120 |
1428044 |
$15.00 |
|
|
Key, Flywheel |
 |
348433 |
$2.00 |
|
|
Pulley (Cup), Starter, New style |
 |
GX120 New Style |
$17.00 |
|
|
GX160 New Style |
$17.00 |
|
|
GX200 New Style |
$17.00 |
|
|
Pulley (Cup), Starter, Old style, GX160 |
3683943 |
$20.00 |
|
|
GASKETS - GENUINE HONDA
(unless noted) |
|
Gasket Exhaust (fits GX120/160/200) |
 |
18381-ZH8-801 |
$3.00 |
|
|
Gasket, 120 Case |
 |
3693488 |
$5.00 |
|
|
Gasket, 160/200 Case |
11381-ZH8-801 |
$5.00 |
|
|
Gasket, Carb |
 |
3683554 |
$1.00 |
|
|
Gasket, Insulator GX120 |
 |
16212-ZH7-800 |
$2.00 |
|
|
Gasket, Insulator GX160/GX200 |
3683547 |
$2.00 |
|
|
Gasket, Gear Case |
 |
3683828 |
$4.30 |
|
|
Gasket, Gear Cover |
 |
21692-ZH8-800 |
$7.00 |
|
|
Gasket, Head GX120 |
 |
12251-Z0S-801 |
$9.00 |
|
|
Gasket, Head GX160 |
 |
3683380, OEM Honda |
$10.00 |
|
|
Aftermarket
(5.5 Clone) |
$9.00 |
|
|
Gasket, Head GX120, OEM Honda, Special Thin, ~ .041 to .042 thickness |
|
3693637-Thin |
$18.00 |
|
|
Gasket, Head GX120, OEM Honda, Special Thin, ~ .038 to .039 thickness
(not QMA legal) |
3693637- .38 |
$18.00 |
|
|
Gasket, Head GX160, OEM Honda, Special Thin, ~ .041 to .042 thickness |
|
3683380-Thin |
$18.00 |
|
|
Gasket, Head GX160, OEM Honda, Special Thin, ~ .038 to .039 thickness
(Not QMA Legal) |
3683380-.38 |
$18.00 |
|
|
Gasket, Head GX200 |
 |
4742763, OEM Honda |
$15.00 |
|
|
Aftermarket
(6.5 Clone) |
$5.00 |
|
|
Gasket (Seal), Air cleaner to Carb |
 |
2534055 |
$5.00 |
|
|
Gasket, Valve Cover |
 |
1426527 |
$3.30 |
|
|
GASKETS - AFTERMARKET
(CLONE) |
|
Gasket Side Cover,
Aftermarket (will not fit motors with 5 Bolt
Valve covers). |
 |
CLSCGSKT |
$2.00 |
|
|
Gasket Side Cover, Lifan/Harbor Freight, For engines
with 5 hole valve covers, will not fit Hondas or Yellow engines. |
 |
LIFANSCGSKT |
$2.00 |
|
|
Gasket, Valve Cover, Aftermarket
for 4 Bolt Valve Covers |
|
CLVCGSKT |
$1.50 |
|
|
Gasket, Valve Cover, for 5 Bolt Lifan and Harbor Freight Motors |
 |
LIFANVCGSKT |
$2.00 |
|
|
GASKET
KITS |
|
Gasket, Engine Kit 120 (GENUINE HONDA) |
 |
5252606 |
$24.00 |
|
|
Gasket, Engine Kit 160 (GENUINE HONDA) |
5177738 |
$27.00 |
|
|
Gasket, Engine Kit 200 (GENUINE HONDA) |
5148085 |
$25.00 |
|
|
Gasket, Engine Kit 200 & 6.5 (Aftermarket)
|
|
Yellow Engines (4 Bolt valve Cover) |
$16.00 |
|
|
Blue Engines (5 Bolt valve Cover) |
$16.00 |
|
|
GAS CAPS |
|
Gas Cap, Chrome, New Style (This is much larger than the old style) |
 |
TOCAP |
$25.00 |
|
|
Gas Cap, Chrome, Old Style, Thinner than new style (These are new in box) |
 |
7736788 |
$13.50 |
|
|
GAS TANKS
& FUEL HOSE (All
gas tanks are new take offs and include
cap) |
|
Gas Tank, GX120 |
 |
120 Tank w/Cap |
$24.99 |
|
|
120 Tank without Cap |
$19.99 |
|
|
Gas Tank, GX160/200 |
160 Tank w/Cap |
$24.99 |
|
|
160 Tank without Cap |
$14.99 |
|
|
Hose, Fuel, Black , 4.5mm, OEM Honda |
|
Per Ft |
$2.00 |
|
|
3.0 (6.4 ft) meter Roll |
$25.00 |
|
|
8.0 meter (17 ft )Roll |
$50.00 |
|
|
GEARBOXES |
|
6 to 1 Gearboxes (Limited Availability),
New Take off |
 |
TOGEAR61 |
$179.00 |
|
|
2 to 1 Gearboxes, new take off |
|
TOGEAR21 |
$250.00 |
|
|
HEADS, CYLINDER |
|
Head Cylinder GX120, OEM Honda, New in Box or Take off,
Bare |
 |
Thailand Made |
$30.00 |
|
|
Japan Made #12/13 Casting |
$129.00 |
|
|
Head Cylinder GX200, OEM Honda,
Bare |
New Take off, Thailand |
$100.00 |
|
|
New in Box, Japan |
$179.00 |
|
|
Head Cylinder GX160, OEM Honda,
18 cc E- Spec, New in Box or Take off, Bare |
ZH8, Japan |
$139.00 |
|
|
Z0T, Thailand |
$89.00 |
|
|
Head Cylinder GX160, Old Style 14cc , OEM Honda, New |
6779243 |
|
|
|
Aftermarket Cylinder Head for 5.5/6.5 (GX200),
All heads are for 4 bolt valve covers. |
 |
14 cc
Head (shown), Bare |
$45.00 |
|
|
14 cc
Head, Assembled with Valves, Retainers, and Springs |
$60.00 |
|
|
22 cc
Head, 4 bolt cover (not shown) |
$40.00 |
|
|
22cc
Head, 4 Bolt, Assembled with Valves, Retainers, and Springs |
$55.00 |
|
|
22cc
Head, 5 Bolt Assembled with Valves, Retainers, and Springs |
$55.00 |
|
|
IGNITION (Including Timing Keys) |
|
Cap, Spark Plug, OEM Honda, Style may Vary |
 |
7346927 |
$13.00 |
|
|
Coil, Ignition, fits GX120/160/200
and Clones |
 |
Genuine Honda |
$32.00 |
|
|
Clone |
$10.00 |
|
|
Spark Plug, Platinum BOSCH +4, For Honda |
 |
BOSCH |
$7.99 |
|
|
Spark Plug, NGK BPR6ES (OEM Honda) |
 |
NGK6ES |
$3.00 |
|
|
JETS |
|
Jet, 60 (0.60 mm, .0236") |
 |
|
$6.00 |
|
|
Jet, 62 (0.62 mm, .0244") |
6010227 |
$6.00 |
|
|
Jet, 65 (0.65 mm, .0256") |
4313375 |
$6.00 |
|
|
Jet, 68 (0.68 mm, .0268")
GX120s Best for 120s |
5519996 |
$6.00 |
|
|
Jet, 70 (0.70 mm, .0276")
GX120s QMA Max |
|
$6.00 |
|
|
Jet, 72 (0.72 mm, .0283") |
|
$6.00 |
|
|
Jet, 75 (0.75 mm, .0295") |
6056147 |
$6.00 |
|
|
Jet, 78 (0.78 mm, .0307") |
6056154 |
$6.00 |
|
|
Jet, 80 (0.80 mm, .0307") |
5947122 |
$6.00 |
|
|
Jet, 82 (0.82 mm, .0323") BEST FOR GX160s, QMA Max |
5947130 |
$6.00 |
|
|
Jet, 85 (0.85 mm, .0335") |
5947148 |
$6.00 |
|
|
Jet, 88 (0.88 mm, .0346") |
5945555 |
$6.00 |
|
|
Jet, 90 (0.90 mm, .0354") GX200s in Hot Weather |
5947155 |
$6.00 |
|
|
Jet, 92 (0.92 mm, .0362") GX200s in Cold Weather, All
Aftermarket
Carbs |
5947163 |
$6.00 |
|
|
Jet, 95 (0.95 mm, .0374") Bored Carbs |
6062665 |
$6.00 |
|
|
Jet, 98 (0.98 mm, .0386") |
4300943 |
$6.00 |
|
|
Jet, 100 (1.00 mm, .0394") |
4310850 |
$6.00 |
|
|
Jet, 102 (1.02 mm, .0402") GX390 Carbs on GX200s |
4723854 |
$6.00 |
|
|
Jet, 105 (1.05 mm, .0413") |
6123335 |
$6.00 |
|
|
Jet, 125 (1.25 mm, .0492") GX200s on Methanol on Std Carbs |
125JET |
$6.00 |
|
|
Jet, 135 (1.35 mm, .0531") GX200s on Methanol on Bored Carbs |
135JET |
$6.00 |
|
|
Jet, 160 (1.60 mm, .0630") Use for adjustable Jets |
160JET |
$6.00 |
|
|
JET BLOCK -
for
Aftermarket and Honda engines provides racers with an easy and economical way
to keep up with jets and jet changes. Made from Billet Aluminum, the new Jet Bock is CNC machined and is very
handy. |
 |
JET BLOCK |
$10.00 |
|
|
BLOCK with 7 drilled Jets |
$35.00 |
|
|
ALUMINUM JET BLOCK with 7 Genuine OEM Honda Jets |
$45.00 |
|
|
Drilled Jets, These are Aftermarket or Honda
jets that have been drilled to the selected size. They do not flow as well
as OEM jets. Select one size larger than you would use for a OEM Jet. |
|
Select Size |
$4.00 |
|
|
Pilot Jet, #35 (.014")
STOCK FOR GX120 & GX160 |
 |
1441609 |
$14.70 |
|
|
Pilot Jet, #38 (.015") |
3353075 |
$14.70 |
|
|
Pilot Jet, #40 (.016") |
3505369 |
$14.70 |
|
|
Pilot Jet, #45 (.018")
Stock for GX200 |
2060465 |
$14.70 |
|
|
Pilot Jet, #50 (.020") |
50PILOT |
$20.00 |
|
|
Pilot Jet, #55 (.022") |
55PILOT |
$20.00 |
|
|
Pilot Jet, #60 (.024")
Use Methonal Applications |
ALKYPILOT24 |
$20.00 |
|
|
MUFFLERS |
|
Muffler, GX120/GX160 |
 |
TOMUF120 |
$19.99 |
|
|
Muffler, GX200 |
 |
TOMUF200 |
$19.99 |
|
|
Muffler, GX240 & GX270 |
 |
TOMUF240 |
$39.99 |
|
|
Muffler GX340/390 (also some GX240 and 270s - Large Style) |
TOMUF340 |
$39.99 |
|
|
PISTONS
(for GX200 Flattops, see
Raceparts). T2 refers to thick (1.6mm) and T3 to thin
(1.0mm) rings. |
|
Piston, GX120, Tier 3 |
 |
13101-ZH7-020 |
$22.00 |
|
|
Piston, GX120, Tier 2* |
6996367* |
$23.00 |
|
|
Piston, GX160, Flat Top, ZH8, Tier 2, Std |
 |
6837512 |
$28.00 |
|
|
Piston, GX160, Flat Top, ZH8, Tier 2, Std, NEW TAKE OFF |
6837512-TO |
$10.00 |
|
|
Piston, GX160, Flat Top, ZH8, Tier 2, Oversize |
|
|
Call or E-Mail |
|
Piston, GX160, Flat Top, ZH8, Tier 3, Std |
|
13101-ZH8-020 |
$26.00 |
|
|
Piston, GX160, Flat Top, ZH8, Tier 3, .25 (.010") |
8587693 |
$28.00 |
|
|
Piston, GX160, Flat Top, ZH8, Tier 3, .50 (.020") |
8587719 |
$28.00 |
|
|
Piston, GX160, Flat Top, ZH8, Tier 3, .75 (.030") |
8587727 |
$28.00 |
|
|
Piston, GX160, Dished, ZH8 , Tier 2 |
 |
160OSPIST |
$28.00 |
|
|
Piston, GX160/GX200, Flat top, Z0T, Tier 2
For oversize go to race parts
Click Here |
|
7351414 |
$15.00 |
|
|
Piston, GX200, OEM Dished, ZL0, Tier 2, Std |
|
|
$40.00 |
|
|
Piston, GX200, OEM Dished, ZL0, Tier 2, Oversize |
Call or E-Mail |
|
Piston, GX200, OEM Dished, ZL0, Tier 3 Std |
|
8589103 |
$26.00 |
|
|
SPECIAL - GX200 T3 Piston and
Rings, New Take Off, OEM Honda |
8589103-TO |
$15.00 |
|
|
Piston, GX200, OEM Dished, ZL0, Tier 3 .25 (.010") |
8589111 |
$28.00 |
|
|
Piston, GX200, OEM Dished, ZL0, Tier 3 .50 (.020") |
8589129 |
$28.00 |
|
|
Piston, GX200, OEM Dished, ZL0, Tier 3, .75 (.030") |
13104-ZL0-020 |
$28.00 |
|
|
Piston, 6.5 Clone, New take Off |
|
|
$5.00 |
|
|
PUSHRODS |
|
Pushrod 120, each |
 |
14410-ZE0-010 |
$5.50 |
|
|
Pushrod 160/200, each |
OEM HONDA 14410-ZE1-010 |
$5.50 |
|
|
Aftermarket |
$2.00 |
|
|
Guide Plate, Push Rod, OEM Honda
(Note: Required on Chinese 6.5 motors to use 1.2 or 1.3
Rocker Arms) |
 |
GX160/200 & Clones |
$3.00 |
|
|
GX120 |
$3.00 |
|
|
REBUILD KITS |
|
For GX120, GX160, & GX200 Rebuild
Kits, Click Here |
|
RECOILS |
|
Recoil GX120/GX160/GX200 Red,
GENUINE HONDA. New design w/black pulley, Starter cup required if replacing old design
(white pully) or using on a Aftermarket.
May be new take off
or new in package (w/o stickers) |
|
GX120/160/200 RECOIL |
$29.99 |
|
|
Recoil, with GX120 Starter Cup (New design), |
GX120 |
$39.99 |
|
|
Recoil, with GX160 Starter Cup (New design), Can use on 200 if
spacer removed. |
GX160 |
$44.99 |
|
|
Recoil GX200, Spacer (If available), and
GX200 Starter Cup (New design) |
GX200 |
$39.99 |
|
|
Recoil Assembly,
6.5 , Aftermarket |
 |
Yellow (color/shade may vary) |
17.99 |
|
|
Blue (not shown) |
17.99 |
|
|
RINGS, GENUINE HONDA
Tier 2 refers to thick (1.6mm) and Tier 3
to thin (1.0mm) rings. |
|
Ring Set GX160/200 Tier 2, Std, |
 |
COMPLETE RING SET |
$24.00 |
|
|
TOP RING ONLY |
$12.00 |
|
|
OIL RING ONLY |
$5.00 |
|
|
Ring Set GX160/200 Tier 2, .010 (.25) |
7351372 |
$26.00 |
|
|
Ring Set GX160/200 Tier 2, .020 (.50) |
7351380 |
$26.00 |
|
|
Ring Set GX160/200 Tier 2, .030 (.75) |
7351398 |
$26.00 |
|
|
Ring Set GX160/200 Tier 3, Std |
13010-Z4K-004 |
$21.00 |
|
|
Ring Set GX160/200 Tier 3, .010 (.25) |
8587628 |
$22.00 |
|
|
Ring Set GX160/200 Tier 3, .020 (.50) |
8587644 |
$22.00 |
|
|
Ring Set GX160/200 Tier 3, .030 (.75) |
8587669 |
$22.00 |
|
|
Ring Set, GX120 Tier 3, Std |
13010-Z4F-004 |
$18.00 |
|
|
Ring Set, GX120 Tier 3, .010 * |
13011-Z4F-004 |
$22.00 |
|
|
Ring Set, GX120 Tier 3, .020 * |
13012-Z4F-004 |
$22.00 |
|
|
Ring Set, GX120 Tier 2, Std (For Oversize Call) |
3017936 |
$20.00 |
|
|
RINGS, AFTERMARKET
Tier 2 refers to thick (1.6mm) and Tier 3
to thin (1.0mm) rings. |
|
Ring Set GX160/200 Aftermarket, for T2 (1.6mm thick), Std |
|
STD |
$7.00 |
|
|
.010" (.25mm) |
$8.00 |
|
|
.020" (.55mm) |
$8.00 |
|
|
.030" (.75mm) |
$8.00 |
|
|
ROCKER ARMS |
|
Rocker Arm, OEM Honda (GX120, 160, 200), each |
 |
1426824 |
$4.50 |
|
|
Rocker Arm, OEM Honda Cryogenic
Treated, Use with HD Springs, Stronger than stock, each |
1426824CRYO |
$10.00 |
|
|
Rocker Arm, Low Friction with Pivot. These are OEM Rocker Arms and Pivots
that have been lapped and treated to reduce friction. Undetectable, each |
 |
OEM HONDA |
$20.00 |
|
|
Aftermarket (Includes studs and nut) |
$20.00 |
|
|
Rocker Arm,
Aftermarket (5.5, 6.5), each |
|
Rocker Arm Only |
$2.00 |
|
|
Rocker Arm Only, Cryo Treated,
Extra Strong |
$8.00 |
|
|
Rocker Arm with stud & pivot ball |
$4.00 |
|
|
RODS, CONNECTING |
|
Rod, Connecting GX120, OEM Honda, new in package |
|
1426592 |
$52.00 |
|
|
Rod, Connecting GX160/200, OEM Honda, New Take off |
|
$20.00 |
|
|
Rod, Connecting GX160/200, ZH8, OEM Honda, new in package |
13200-Z0T-010 |
$38.00 |
|
|
Rod, Connecting GX160/200, Z4M,
OEM Honda, .080 Longer than Stock, Custom Applications |
13200-Z4M-800 |
$38.00 |
|
|
Rod, Connecting GX160/200,
Aftermarket (clone), New Take Off |
|
|
$5.00 |
|
|
SEALS & OIL PLUGS |
|
Oil Seal, 120 Crank (Shaft) Side ZE0 |
 |
1431352 |
$6.50 |
|
|
Oil Seal, 120, Flywheel Side ZE6 |
3270246 |
$6.50 |
|
|
Oil Seal, 160/200, Fits Crank & Flywheel Side |
91201-Z0T-801 |
$5.00 |
|
|
Oil Seal, Gearbox, 2 TO 1 |
91202-Z2F-801 |
$5.00 |
|
|
Oil Seal, Gearbox, 6 TO 1 |
91201-Z0T-801 |
$5.00 |
|
|
Oil Plug, Grey
(will not fit some clones) |
 |
4500146 |
$5.00 |
|
|
Oil Pug, Black
(will not fit some clones) |
 |
4497921 |
$5.00 |
|
|
Drain Plug, GX120 to GX200 |
 |
1431246 |
$2.00 |
|
|
Drain Plug, 6 to 1 Gear Box |
|
90131-896-650 |
$3.19 |
|
|
Bolt, Breather, 6 to 1 Gear Box |
|
90002-883-740 |
$4.00 |
|
|
Drain Plug Washer |
 |
1436583 |
$1.00 |
|
|
SHORT BLOCKS New
block w/piston, crank, rings, lifters, Camshaft, etc. (does not
include flywheel or fan) |
|
Short block - GX120 HX2 |
 |
SBGX120H2 |
$289
+
$10 extra Shipping |
|
|
Short block - GX120 QX2 |
SBGX120Q2 |
$189
+
$10 extra Shipping |
|
|
Short Block - GX160 HX2 |
SBGX160H2 |
$279
+
$10 extra Shipping |
|
|
Short block - GX160 QX2 |
SBGX160Q2 |
$179
+
$10 extra Shipping |
|
|
Short block - GX200 HX2 |
SBGX200H2 |
$349
+
$10 extra Shipping |
|
|
Short block - GX200 QX2 |
SBGX200Q2 |
$209
+
$10 extra Shipping |
|
|
Clone 6.5 |
SBCLONE |
$70
+
$10 extra Shipping |
|
|
SHROUDS & COVERS
(all shrouds and covers are new takes offs) |
|
Fan Shroud, GX120 Red |
 |
TOSHRD120 |
$19.99 |
|
|
Fan Shroud, GX160 Red (requires trimming to work on GX200s) |
TOSHRD160 |
$19.99 |
|
|
Fan Shroud, GX200 Red (Will work on 160's) |
TOSHRD200 |
$19.99 |
|
|
ELECTRIC START VERSION |
|
|
|
Fan Shroud, Aftermarket, Clone |
|
Yellow |
$12.00 |
|
|
Blue (HF & Lifan) |
$12.00 |
|
|
Skull Shroud |
 |
Click Here for more info and to order |
|
Fan Shroud, GX160 Black |
 |
TOSHRD160BK |
$39.99 |
|
|
Fan Shroud, Lower |
 |
GX120 |
$12.00 |
|
|
GX160 |
$12.00 |
|
|
GX200 |
$12.00 |
|
|
Side Plate |
 |
GX120 |
$7.00 |
|
|
GX160 |
$7.00 |
|
|
GX200 |
$7.00 |
|
|
SPRINGS, VALVE |
|
Valve Spring GX120/160/200
(10.8 lb),
OEM Honda, Sold in Pairs |
 |
3683489 |
$6.00 |
|
|
Valve Spring GX120, Bag of 10 |
3683489-10 |
$25.00 |
|
|
Valve Spring GX120 CRYOGENIC TREATED Last up to 5 times longer than stock. By
maintaining pressure, Lap times are improved., Sold in Pairs |
CRYOSPRING |
$10.00 |
|
|
Valve Spring GX140, ea (Use for GX160s - QMA legal), Sold in Pairs |
|
14751-ZE1-000 |
$6.00 |
|
|
Valve Spring GX140, Bag of 10, Sold in
Pairs |
1426972-10 |
$25.00 |
|
|
Valve Spring 18lb (883) |
|
|
Go to race parts |
|
Valve Springs,
Aftermarket 6.5 (10.8 lbs)
New Take Off, Sold in Pairs |
|
|
$1.00 |
|
|
SWITCHES |
|
Switch, On-Off with Oil Cut Off Module, All Hondas with recoil Only Start |
 |
TOSWMAN |
$3.99 |
|
|
SUNGEARS (HX2) |
|
Sungear for 6 to 1 gearbox |
|
0674374 |
$199.00 |
|
|
Lightend
Sungear for 6 to 1 gearbox |
|
$250.00 |
|
|
VALVES |
|
Valve, Exhaust GX120, OEM Honda |
|
3694015 |
$20.00 |
|
|
Valve, Exhaust GX160/200, OEM Honda |
3683463 |
$20.00 |
|
|
Valve Intake GX160/200, OEM Honda |
3683455 |
$14.00 |
|
|
Valve, Intake GX120, OEM Honda |
6839880 |
$14.00 |
|
|
Valve 6.5, Aftermarket |
Set, Includes Intake and Exhaust |
$10.00 |
|
|
Exhaust (New Take offs) |
$3.00 |
|
|
VALVE COVERS |
|
Valve Cover with Pulse Fitting,
Genuine Honda |
 |
VCWITHPULSE |
$15.00 |
|
|
Valve Cover, Chrome Plated, Genuine Honda |
 |
CPVC |
$20.00 |
|
|
Valve Cover w/Nipple
(fits GX120/160/200), OEM Honda |
 |
12310-ZE1-842 |
$10.00 |
|
|
Valve Cover , 5 bolt,
for Blue Motors |
 |
|
$15.00 |
|
|
Valve Cover GX120/GX160/GX200
4 Bolt. New and/or Take Off |
 |
GENUINE HONDA |
$4.00 |
|
|
Aftermarket |
$4.00 |
|
|
VALVE GUIDES |
|
Valve Guide, Exhaust (Must be reamed after installation) |
 |
1899848 |
$7.50 |
|
|
Valve Guide, Intake (Must be reamed after installation) |
4165874 |
$7.50 |
|
|
VALVE TRAIN COMPONENTS |
|
Retainer, Intake Valve |
 |
14771-ZE1-000 OEM HONDA |
$6.50 |
|
|
Aftermarket |
$3.50 |
|
|
Retainer, Exhaust Valve |
 |
OEM HONDA
14773-ZE1-000 |
$6.50 |
|
|
Aftermarket |
$3.50 |
|
|
Rotater, Exhaust Valve (Lash Cap) |
 |
OEM HONDA 1427004 |
$3.50 |
|
|
Aftermarket |
$2.50 |
|
|
Stud, Rocker Arm
(Note: these will not interchange between Honda and
Aftermarkets) |
 |
Honda only
1756964 |
$5.25 |
|
|
Aftermarket (includes Rocker arm, pivot, & nut) |
$4.00 |
|
|
Nut, Rocker Arm
(Note: these will not interchange between Honda and
Aftermarkets, must order correct for engine) |
 |
Honda only
90206-ZE1-000 |
$2.70 |
|
|
Aftermarket |
|
|
|
Pivot, Rocker Arm
(Note: these will not interchange between Honda and
Chinese engines) |
 |
Honda only
14451-ZE1-013 |
$4.50 |
|
|
Aftermarket |
|
|
|
WRISTPINS & CLIPS |
|
Wristpin GX120 |
 |
1426576 |
$5.00 |
|
|
Wristpin GX160/200 |
1426584 |
$7.00 |
|
|
Clip, Piston Pin (13MM), GX120 |
 |
2605517 |
$1.00 |
|
|
Clip, Piston Pin (18MM), GX160/200 |
2539120 |
$1.00 |
|
|
Part/Model numbers are for reference only and are subject
to change. Actual part may have a different number, however it will be
latest available part and will match description. If you require an
exact part number (i.e. for class or rule requirements), please e-mail. |
|
In some cases, New "Take Off" Parts may be substituted (particularly for
Cams, Cranks, Sungear, and other hard to get items). In these cases, the
take off parts are unused and fully guaranteed, with the only difference
being lack of factory packaging. If you require parts in factory
packaging please send a e-mail.
Pictures are for reference only.
|
